1994

RESET FILTERS    Category:   
Product Type:
DSTU 2736-94
DSTU 2736-94
Rotating amplifiers. Terms and definitions.
DSTU 2737-94
DSTU 2737-94
Information recording and reproduction. Terms and definitions.
DSTU 2738-94
DSTU 2738-94
Instruments for measuring bioelectric potentials of the heart. Nomenclature of indicators. Terms and definitions.
DSTU 2739-94
DSTU 2739-94
Shipboard installations for oil-contaminated water treatment. Terms and definitions.
DSTU 2740-94
DSTU 2740-94
Production of castings in metal moulds and using continuous casting method. Safety requirements.
DSTU 2741-94
DSTU 2741-94
Electronic equipment of vehicles. Reliability test methods.
DSTU 2742-94 (GOST 5006-94)
DSTU 2742-94 (GOST 5006-94)
Toothed clutches. Specifications
DSTU 2743-94 (GOST 26543-94)
DSTU 2743-94 (GOST 26543-94)
Planetary gearmotors. Basic parameters
DSTU 2744-94 (GOST 24266-94)
DSTU 2744-94 (GOST 24266-94)
Reducers and motor-reducers shaft ends. Basic dimensions, allowable torques
DSTU 2745-94
DSTU 2745-94
Paper and cardboard. Determination of roughness / smoothness (methods using air transmission). general requirements
DSTU 2745-94 (GOST 30115-95) (ISO 8791-1:1986)
DSTU 2745-94 (GOST 30115-95) (ISO 8791-1:1986)
Paper and board. Determination of roughness/smoothness (air leak methods). General method
DSTU 2746-94 (GOST 30164-94)
DSTU 2746-94 (GOST 30164-94)
Reducers and gear-motors, block-modulus drives. Types of construction and mounting arrangements
DSTU 2747-94 (GOST 20373-94)
DSTU 2747-94 (GOST 20373-94)
Reducers and gear-motors. Assembly variations
DSTU 2748-94 (GOST 26218-94)
DSTU 2748-94 (GOST 26218-94)
Harmonic drive reducers and reduction gearmotors. Parameters and dimensions
DSTU 2749-94
DSTU 2749-94
Tires (series marked with ply rating) and rims for agricultural tractors and machines. Nominal tire loads
DSTU 2750-94 (GOST 21694-94)
DSTU 2750-94 (GOST 21694-94)
Welding mechanical equipment. General specifications
DSTU 2751-94
DSTU 2751-94
Powder metallurgy. Terms and definitions.
DSTU 2752-94
DSTU 2752-94
Metal-working and woodworking equipment. Metal-cutting machines. Safety requirements.
DSTU 2753-94
DSTU 2753-94
Metal-working and woodworking equipment. Household woodworking equipment. Safety requirements.
DSTU 2754-94
DSTU 2754-94
Metal-working and woodworking equipment. Metal-cutting machines. Method for estimation of safety.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!