Documents by Year

1970s (1)

1973 (1)

1980s (2)

1990s (2734)

2000s (11200)

2010s (11699)

DSTU

«
1
…
63
64
65
66
67
68
69
…
74
»

DSTU ISO 7753:2015

Nuclear power. Performance requirements and test methods for criticality and alarm systems

DSTU ISO 7780:2015

Rubber and rubber latexes. Determination of manganese content. Photometric methods using sodium iodide

DSTU ISO 7781:2015

Styrene-butadiene rubber. Determination of soap and organic acids

DSTU ISO 7783:2015

Paints and varnishes. Determination of the transmittance of water vapor. Bowl method (ISO 7783: 2011, IDT)

DSTU ISO 7784-1:2015

Paints and varnishes. Determination of abrasion resistance. Part 1. Method using a sandpaper-coated roller that rotates (ISO 7784-1: 1997, IDT)

DSTU ISO 7784-2:2015

Paints and varnishes. Determination of abrasion resistance. Part 2. Using a rubber roller with an abrasive that rotates (ISO 7784-2: 1997, IDT)

DSTU ISO 7784-3:2015

Paints and varnishes. Determination of abrasion resistance. Part 3. Method using the reciprocating motion of a test plate (ISO 7784-3: 2000, IDT)

DSTU ISO 7854:2015

Fabrics with rubber or plastic coating. Determination of resistance to damage in case of repeated bending

DSTU ISO 787-13:2015

Pigments and fillers. General test methods. Part 13. Determination of water-soluble sulfates, chlorides and nitrates

DSTU ISO 787-18:2015

General test methods for pigments and fillers. Part 18. Determination of residue on the sieve. Method of mechanical washing (ISO 787-18: 1983, IDT)

DSTU ISO 787-3:2015

Pigments and fillers. General test methods. Part 3. Determination of the content of water-soluble substances. Hot Extraction Methods

DSTU ISO 787-7:2015

General test methods for pigments and fillers. Part 7. Determination of residue on the sieve. Method using water. Manual method (ISO 787-7: 2009, IDT)

DSTU ISO 7926:2015

Dehydrated Tarragon (Artemisia dracunculus Linnaeus). Technical conditions

DSTU ISO 8017:2015

Devices for molding. Columns directing direct with a zapchikama and speakers

DSTU ISO 8018:2015

Devices for molding. Guide sleeves with head and guide sleeves with head

DSTU ISO 8038:2015

Microscopes. Threads for lenses and turret mounts

DSTU ISO 8051:2015

Taps with a long shank of nominal diameter from M3 to M10. Full diameter shank taps with groove

DSTU ISO 8053:2015

Rubber and latex. Determination of copper content. photometric method

DSTU ISO 8068:2015

Lubricants, industrial oils and related products (class L). Classification. Group T (Turbines). Turbine Oil Specification

DSTU ISO 8116-2:2015

Textile machinery and accessories. Navoi. Part 2. Warp rollers

DSTU ISO 8216-1:2015

Petroleum products. Fuel (class F). Classification. Part 1. Categories of fuel used on ships

DSTU ISO 830:2015

Cargo containers. Glossary (ISO 830: 1999; Cor 1: 2001, IDT)

DSTU ISO 8323:2015

Cargo containers. Universal (intermodal) containers for air and land transportation. Technical conditions and test methods (ISO 8323: 1985, IDT)

DSTU ISO 8494:2015

Metallic materials. Pipes. Side test

DSTU ISO 8501-2:2015

Preparation of steel surfaces before applying paints and similar products. Visual assessment of surface cleanliness. Part 2. The degree of preparation of pre-painted steel surfaces after localized (local) removal of previous coatings

DSTU ISO 8501-3:2015

Preparation of steel surfaces before applying paints and similar products. Visual assessment of surface cleanliness. Part 3. The degree of preparation of welds, ribs and other areas with surface defects

DSTU ISO 8501-4:2015

Preparation of steel surfaces before applying paints and similar products. Visual assessment of surface cleanliness. Part 4. Initial surface conditions, degree of preparation and degree of rusting by high pressure water-jet treatment

DSTU ISO 8502-11:2015

Preparation of steel surfaces before applying paints and similar products. Tests to assess surface cleanliness. Part 11. Turbidimetric method for the determination of water-soluble sulfates in the field

DSTU ISO 8502-12:2015

Preparation of steel surfaces before applying paints and similar products. Tests to assess surface cleanliness. Part 12. Zonal method for titrometric determination of water-soluble iron ions

DSTU ISO 8502-2:2015

Preparation of steel surfaces before applying paints and similar products. Tests to assess surface cleanliness. Part 2. Laboratory determination of chloride on a cleaned surface

DSTU ISO 8502-3:2015

Preparation of steel surfaces before applying paints and similar products. Tests to assess surface cleanliness. Part 3. Assessment of the presence of dust on the prepared steel surface for painting (adhesive tape method)

DSTU ISO 8502-4:2015

Preparation of steel surfaces before applying paints and similar products. Tests to assess surface cleanliness. Part 4. Instructions for assessing the likelihood of condensation before applying paint

DSTU ISO 8502-5:2015

Preparation of steel surfaces before applying paints and similar products. Tests to assess surface cleanliness. Part 5. Measurement of chloride on a steel surface prepared for painting (ion detection tube method)

DSTU ISO 8502-6:2015

Preparation of steel surfaces before applying paints and similar products. Tests to assess surface cleanliness. Part 6. Extraction of soluble contaminants for analysis - Bresley method

DSTU ISO 8502-9:2015

Preparation of steel surfaces before applying paints and similar products. Tests to assess surface cleanliness. Part 9. The method of conductometric determination of water-soluble salts in the field

DSTU ISO 8503-5:2015

Preparation of steel surfaces before applying paints and similar products. Roughness characteristics of steel surfaces after blast cleaning. Part 5. Determination of surface profile by imprint on tape

DSTU ISO 8504-1:2015

Preparation of steel surfaces before applying paints and similar products. Surface preparation methods. Part 1. General principles

DSTU ISO 8504-2:2015

Preparation of steel surfaces before applying paints and similar products. Surface preparation methods. Part 2. Abrasive blast cleaning

DSTU ISO 8504-3:2015

Preparation of steel surfaces before applying paints and similar products. Surface preparation methods. Part 3. Cleaning with hand or electric tools

DSTU ISO 8611-1:2015

Pallets for processing materials. Pallets are flat. Part 1. Test methods (ISO 8611-1: 2011, IDT)

DSTU ISO 8611-2:2015

Pallets for processing materials. Pallets are flat. Part 2. Requirements for efficiency and choice of test methods (ISO 8611-2: 2011, IDT)

DSTU ISO 8611-3:2015

Pallets for processing materials. Pallets are flat. Part 3. Maximum workload (ISO 8611-3: 2011, IDT)

DSTU ISO 8655-1:2015

Measured piston devices. Part 1. Terminology, general requirements and recommendations to the user

DSTU ISO 8655-2:2015

Measured piston devices. Part 2. Piston pipettes

DSTU ISO 8655-3:2015

Measured piston devices. Part 3. Piston Burettes

DSTU ISO 8655-5:2015

Measured piston devices. Part 5. Dispensers

DSTU ISO 8655-6:2015

Measured piston devices. Part 6. Gravimetric method for determining the measurement error

DSTU ISO 8689-2:2015

Water quality. Biological classification of rivers. Part 2. Guidance on the submission of biological quality data for observation of macrobenthic-free bottom

«
1
…
63
64
65
66
67
68
69
…
74
»

All Codes and Regulations

DBN	DSTU	Other UA norms	SOU
DNAOP	MSP	PUE	VBN

All Categories

Construction (Max)	Highways (Max)	National Standards for KGS (State Standards Classification)	Projects of works (PPR) on bridges	Technical Supervision
Construction Price Formation	ISO classifier	Organization Standards	PromExpert	Welding regulations
Evidence base (TR CU, Technical Regulation of the Customs Union)	National standards	Power industry	Standards for pipe fittings (TPA)

©RGTT 2016. All Rights Reserved.

Send us a message

Leave your message in the form below, and we will write back by e-mail!