Documents by Year
1970s (1)
1980s (2)
1990s (2734)
2000s (11200)
2010s (11699)
Other (9)

DSTU

DSTU GOST 22235:2015
DSTU GOST 22235:2015
Freight cars of the main railways of 1520 mm gauge. General requirements for ensuring safety during handling and shunting
DSTU GOST 28072:2015
DSTU GOST 28072:2015
Weapons for sport and hunting. Classification. Assessment of the quality level of sporting and hunting firearms in the development and production (GOST 28072-89, IDT)
DSTU GOST 4.416:2015
DSTU GOST 4.416:2015
Weapons for sport and hunting. Sports and hunting cartridges, paper and plastic sleeves. The nomenclature of indicators (GOST 4.416-86, IDT)
DSTU GOST 7837:2015
DSTU GOST 7837:2015
Weapons for sport and hunting. Shot hunting, sports and canister. Specifications (GOST 7837-76, IDT)
DSTU IEC 60038:2015
DSTU IEC 60038:2015
IEC reference voltage
DSTU IEC 60050-551-20:2015
DSTU IEC 60050-551-20:2015
Electrotechnical dictionary. Part 551-20. Power electronics. Harmonic analysis (IEC 60050-551-20 2001, IDT)
DSTU IEC 60062:2015
DSTU IEC 60062:2015
Codes for marking resistors and capacitors
DSTU IEC 60063:2015
DSTU IEC 60063:2015
Resistors and capacitors. Rows of Preferential Numbers
DSTU IEC 60068-1:2015
DSTU IEC 60068-1:2015
Tests for external factors. Part 1. General provisions and settings
DSTU IEC 60068-2-10:2015
DSTU IEC 60068-2-10:2015
Tests for external factors. Part 2-10. Tests J Testing and Installation: Mold Formation
DSTU IEC 60068-2-14:2015
DSTU IEC 60068-2-14:2015
Tests for external factors. Part 2-14. Tests Test N: Temperature Change
DSTU IEC 60068-2-17:2015
DSTU IEC 60068-2-17:2015
Tests for external factors. Part 2-17. Tests Test Q: Seal
DSTU IEC 60068-2-20:2015
DSTU IEC 60068-2-20:2015
Tests for external factors. Part 2-20. Tests Test T Test methods for soldering and heat resistance of soldering devices with wires
DSTU IEC 60068-2-21:2015
DSTU IEC 60068-2-21:2015
Tests for external factors. Part 2-21. Tests U Test: Strength of Terminals and One-piece Fasteners
DSTU IEC 60068-2-27:2015
DSTU IEC 60068-2-27:2015
Tests for external factors. Part 2-27. Tests EA Testing and Installation: Impact
DSTU IEC 60068-2-30:2015
DSTU IEC 60068-2-30:2015
Tests for external factors. Part 2-30. Tests Tests Db: Moist heat, cyclic (12 h 12 h cycle)
DSTU IEC 60068-2-38:2015
DSTU IEC 60068-2-38:2015
Tests on the influence of external factors. Part 2-38. Trial. Z / AD Test: A complex cycle test for temperature / humidity
DSTU IEC 60068-2-39:2015
DSTU IEC 60068-2-39:2015
Tests on the influence of external factors. Part 2-39. Trial. Z / AMD Test: Combined Sequence Test for Cold, Low Atmospheric Pressure and Wet Heat
DSTU IEC 60068-2-42:2015
DSTU IEC 60068-2-42:2015
Tests for external factors. Part 2-42. Tests Kc Testing: Sulfur Dioxide Testing of Contacts and Compounds
DSTU IEC 60068-2-43:2015
DSTU IEC 60068-2-43:2015
Tests for external factors. Part 2-43. Tests Kd tests: Testing contacts and compounds for exposure to hydrogen sulfide
DSTU IEC 60068-2-44:2015
DSTU IEC 60068-2-44:2015
Tests for external factors. Part 2-44. Tests T Test Guide: Soldering
DSTU IEC 60068-2-47:2015
DSTU IEC 60068-2-47:2015
Tests for external factors. Part 2-47. Tests Installation of elements, equipment and other products for vibration, shock and similar dynamic tests
DSTU IEC 60068-2-5:2015
DSTU IEC 60068-2-5:2015
Tests for external factors. Part 2-5. Tests Test Sa: Simulation of solar radiation at ground level and installation for testing solar radiation
DSTU IEC 60068-2-52:2015
DSTU IEC 60068-2-52:2015
Tests for external factors. Part 2-52. Tests Test Kb: Salt mist, cyclic test (sodium chloride solution)
DSTU IEC 60068-2-54:2015
DSTU IEC 60068-2-54:2015
Tests on the influence of external factors. Part 2-54. Trial. Tests Yes: Tests for soldering electronic components by uniform wetting
DSTU IEC 60068-2-6:2015
DSTU IEC 60068-2-6:2015
Tests for external factors. Part 2-6. Tests Fc Test: Vibration (Sine)
DSTU IEC 60068-3-1:2015
DSTU IEC 60068-3-1:2015
Tests for external factors. Part 3-1. Additional documentation and installations. Cold and dry heat tests
DSTU IEC 60085:2015
DSTU IEC 60085:2015
Electrical insulation. Evaluation of heat resistance and lettering (IEC 60085: 2007, IDT)
DSTU IEC 60086-2:2015
DSTU IEC 60086-2:2015
Primary batteries. Part 2. Physical and electrical specifications
DSTU IEC 60095-1:2015
DSTU IEC 60095-1:2015
Lead-acid starter batteries. Part 1. General requirements and test methods
DSTU IEC 60107-1:2015
DSTU IEC 60107-1:2015
Receivers for television broadcasting. Methods for measuring parameters. Part 1. General Provisions. Radio and video measurements
DSTU IEC 60112:2015
DSTU IEC 60112:2015
Solid electrical insulating materials. Methods for determining the regulatory and comparative tracking resistance indices
DSTU IEC 60115-1:2015
DSTU IEC 60115-1:2015
Fixed resistors for electronic equipment. Part 1. General specifications
DSTU IEC 60115-2:2015
DSTU IEC 60115-2:2015
Fixed resistors for electronic equipment. Part 2. Specifications group. Permanent low-power resistors with wire leads
DSTU IEC 60115-8:2015
DSTU IEC 60115-8:2015
Fixed resistors for electronic equipment. Part 8. Group specifications. Surface Mounted Resistors
DSTU IEC 60130-9:2015
DSTU IEC 60130-9:2015
Connectors at frequencies up to 3 MHz. Part 9. Circular connectors for radio equipment and related acoustic equipment
DSTU IEC 60196:2015
DSTU IEC 60196:2015
IEC standard frequencies
DSTU IEC 60205:2015
DSTU IEC 60205:2015
Magnetic parts. Calculation of effective parameters
DSTU IEC 60216-1:2015
DSTU IEC 60216-1:2015
Electrical insulating materials. Characteristics of heat resistance. Part 1. Methods of conducting an aging test and evaluating results (IEC 60216-1: 2001, IDT)
DSTU IEC 60216-2:2015
DSTU IEC 60216-2:2015
Electrical insulating materials. Characteristics of heat resistance. Part 2. Determination of heat resistance indicators. Selection of test criteria (IEC 60216-2: 2005, IDT)
DSTU IEC 60216-3:2015
DSTU IEC 60216-3:2015
Insulating materials. Heat resistance characteristics. Part 3. Recommendations on the calculation of the characteristics of heat resistance (EEC 60216-3: 2006 Cor 1: 2009, IDT)
DSTU IEC 60227-1:2015
DSTU IEC 60227-1:2015
Polyvinyl chloride insulated cables up to 450/750 V incl. Part 1. General requirements
DSTU IEC 60304:2015
DSTU IEC 60304:2015
Standard colors for insulating low-frequency cables and wires
DSTU IEC 60335-2-50:2015
DSTU IEC 60335-2-50:2015
Household and similar electrical appliances. Security. Part 2-50. Additional Requirements for Commercial Electric Food Warmers
DSTU IEC 60352-1:2015
DSTU IEC 60352-1:2015
Non-soldered connection. Part 1. Wire wrapping. General requirements, test methods and practical guidelines
DSTU IEC 60371-1:2015
DSTU IEC 60371-1:2015
Electrical insulating materials based on mica. Technical conditions Part 1. Terms and definitions and general technical requirements
DSTU IEC 60371-2:2015
DSTU IEC 60371-2:2015
Electrical insulating materials based on mica. Technical conditions Part 2. Test methods
DSTU IEC 60384-1:2015
DSTU IEC 60384-1:2015
Constant capacitors for electronic equipment. Part 1. General specifications

All Codes and Regulations

DBN DSTU Other UA norms SOU
DNAOP MSP PUE VBN

All Categories

Construction (Max) Highways (Max) National Standards for KGS (State Standards Classification) Projects of works (PPR) on bridges Technical Supervision
Construction Price Formation ISO classifier Organization Standards PromExpert Welding regulations
Evidence base (TR CU, Technical Regulation of the Customs Union) National standards Power industry Standards for pipe fittings (TPA)

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!